Escient FireBall H-40 Remote control User's Guide download pdf (Page 140)

FIREABALL REMOTE CONTROL GUIDE WD046-1-2

9/30/2005

6640 Intech Blvd. Suite 250 Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com

APPENDIX B – Detailed Remote Instructions

Nomenclature:

<<Code Set>> means to press and hold the Code Set button on the remote until the LED

flashes twice.

Mode is any of the eight source buttons on the remote.

ID Code Setup

The four digit code obtained from the Appendix A can be programmed as follows:

Mode Æ <<Code Set>> Æ DigitÆ DigitÆ DigitÆ Digit

When successful, the LED will blink two times after <<Code Set>>. The LED will blink once

after each digit entry except for the last digit and will blink two times to confirm that a valid

code has been programmed. The remote will turn off the LED, automatically exit the

programming mode, return to the idle mode and restore the last preprogrammed codes under

two conditions:

1. When 10 seconds has elapsed after the last key press.

2. When an invalid code is entered upon which the LED will display one long blink.

The programming mode will be exited at any time by pressing any key other than the digit key.

ID Code Verification (990)

The device code for a mode will be verified as follows:

Mode Æ <<Code Set>> Æ 9 Æ 9 Æ 0 Æ 1 (count blinks)Æ 2 (count blinks) Æ 3 (count blinks)

Æ 4 (count blinks).

The number of blinks counted after pressing each digit 1, 2, 3 and 4 key represents the 4 digit

device code for the selected mode beginning with the left most digit. The remote will exit the

Code Verification state when, after performing the sequence <9> Æ <9> Æ <0>, the user

presses any key other than digit 1. If the sequence of pressing digits 1, 2, 3 and 4 for counting

blinks is not maintained, the remote will exit Code Verification state. Operation error and state

exit will be marked by the LED emitting a long blink. The remote will time out after 10 seconds

during programming if no keys are pressed.

Example:

To verify the TV code is 0047:

<TV>Æ<<Code Set>> Æ 9 Æ 9 Æ 0 Æ

<1> Æ 0 blinks

<2> Æ 0 blinks

<3> Æ 4 blinks

<4> Æ 7 blinks

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 188 189

No comments

Escient FireBall H-40 Remote control User's Guide Page 140