Escient FireBall FireBall Media Management system Technical Information download pdf (Page 4)

SE-D1 START UP GUIDE

PAGE

2)Follow these steps to connect your Sony CD/DVD changers to

your FireBall:

1. Connect one end of the included RS-232 serial cable into Communication

Port labeled “Changer”, on the back of your FireBall.

2. Connect the other end of the RS-232 serial cable into the “RS-232C” port on

the back of your Sony changer.

3. Locate the Analog Audio (red/white) / Composite Video (yellow) cable that

came with your changer.

4. Connect one end of the Analog Audio (red/white) cable into the Analog Audio

(red/white) In jacks on the back of your FireBall

5. Connect the other end of the Analog Audio (red/white) cable into the Analog

Line Out jacks on the back of your changer.

6. Connect one end of the Composite Video (yellow) into the Composite Video

(yellow) In jacks on the back of your FireBall

7. Connect the other end of the Composite Video (yellow) cable into the Video

Line Out jacks on the back of your changer.

• For the best audio quality, you should also connect a digital optical cable (not included)

between your changer and FireBall.

• For the best video quality, you should also connnect component video cables (not included)

between your changer and FireBall.

Note: The RS-232 serial control cable between the FireBall and the changer must be 25 feet or less

in length.

1 2 3 4 5 6 7 8 9 ... 17 18

No comments

Escient FireBall FireBall Media Management system Technical Information Page 4